/

Rehobot PH Series Single Stage Aluminum Hand Pumps 700-800 Bar

REHOBOT PH

Single speed, single acting
Available in 700 bar, 800 bar
Flow rate per stroke 2.9 cm³
Limited pump efort required
Simple and functional design
Oil outgoing port thread G1/4”
Pressure gauge optionally available
Light weight, ergonomic, user friendly
Built-in safety valve provides reliability

Rehobot PH Series: 700 Bar Single Speed Hand Pumps

Single stage pumps in the PH series have a simple but functional design. Few moving parts and a built-in safety valve provide reliable performance. They are real workhorses that will give years of service. All pumps can be equipped with a pressure gauge so the user can monitor the discharge pressure.

Hand pumps in the PH series are available with 70 or 80 MPa working pressure and with the choice of 600 or 1000 cm³ effective oil capacity.

PH70A-600 700 Bar Hydraulic Hydraulic Hand Pump
PH70A-1000 700 Bar Hydraulic Hydraulic Hand Pump
PH80A-600 800 Bar Hydraulic Hydraulic Hand Pump
PH80A-1000 800 Bar Hydraulic Hydraulic Hand Pump

Technical Data	Unit	PH70A-600	PH70A-1000	PH80A-600	PH80A-1000
Item Code	**	49100	49101	49102	49103
Working Pressure (Max.)	bar	700	700	800	800
Working Pressure (Max.)	mpa	70	70	80	80
Working Pressure (Max.)	psi	10.152	10.152	11.603	11.603
Effective Oil Volume	cm³	600	1000	600	1000
Flow Rate per Stroke	cm³	2.9	2.9	2.9	2.9
Handle Effort at Max. Pressure	kg	45	45	51	51
Outgoing Port Thread	G	1/4"	1/4"	1/4"	1/4"
Weight Including oil	kg	4.5	5.2	4.5	5.2
Dimensions (A x B x C x D)	mm	590x170x90x68	590x170x110x80	590x170x90x68	590x170x110x80

Gauge optionally available

To ensure complete operator safety at all times we recommend the fitting of a pressure gauge (AMT801) with gauge adaptor (AVM204) to this series of hand pumps.

Oil Outgoing Port

The hydraulic connection interface on all PH pumps is a G1/4" threaded port.

Safety features

The pump is equipped with a safety valve that limits the output pressure. The safety valve is set at the factory to the maximum working pressure.

Safety Advise

When accessories are selected for a hydraulic system, the working pressure rating for these shall be equal to or higher than the pump unit's maximum working pressure. For hoses we recommend a 3-4 fold safety margin between the hydraulic system's maximum operating pressure and the burst pressure of the hose. It is also important to ensure that the pump's effective oil volume exceeds the total volume of oil in the hydraulic system, preferably with a safety margin of about 20%.

Views