Wall Tool Board Storage

TSS-BF-2000 / Basic Frame for Wall Mounting

ww-TSS-BF-2000 basic frame is one of the main elements of all tool storing systems. Each panel has a 50 kg carrying capacity and each profile has 200 kg capacity.

Basic frames can be used on walls where direct raw plugging is not suitable and can also be used in any tool storing furniture system that has the end number 2000, such as wing shape or square shape etc.

The tool boards are supplied with 9 connection  components in the basic frame assembly.
Order Code: ww-TSS-BF-2000-KIT

TSS-WFRB-2000 / Wing Frame Rack

Wing panel kit consists of two mobile and two wall-fixed wings. With a total area of 12m², this module contains 12 panels.

The distance between mobile wings and wall-fixed wings has an optimum area and can be mounted with different sized-equipments. Wing panel fixed module allows you to hang nearly 600 pieces of special tools and kits.

Order Code: ww-TSS-WFRB-2000-KIT

You can attach an extension module to obtain additional 8m² spaces where can be hanged an extra 400 pieces of tool.

ww-TSS-WFRE-2000-KIT / Wing Panel Extension Module

Wing panel extension module with a space of 8m ² allows you to hang up an extra 400 pieces special tool and kits.

The extension module can be ordered as additional to wing frame panel kit and can only be attached to the wing frame panel kit. Can not be used alone.

Extension module can be assembled easily with a few connection ports.

Order Code: ww-TSS-WFRE-2000-KIT

ww-TSS-PTC-2000-2-KIT / Tool Cabinet with 2 Sliding Boards

Tool cabinet based into steel frame, consists of two wing boards which can be pulled out to front side. Each wing board have 4 panels and have 8m² space where can be hanged nearly 400 pieces tool and special kits. Both wing board work parallel to each other and the distance between the two wings is 45cm. This distance is optimum for hanging up several tools and special kits.
Tool cabinets can be extended by attaching each other alongside or face to face according to needs. Facing sides of cabinets can be connected and formed as a bridge from upside with an 80cm distance. The facades of cabinets are not covered with metal sheet. Upon your request, external facades of cabinets can be covered with metal sheet and a locking system can be applied.

Order Code: ww-TSS-PTC-2000-KIT

ww-TSS-PTC-2000-5-KIT / Tool Cabinet with 5 Sliding Boards

Sliding tool cabinet with 5 pull outs has the widest space in Weitner Panel system furniture.This cabinet has 5 sliding wing boards. Each have 20m² spaces with binary sides for nearly 1000 pieces special tools and kits. The distance between the sliding wing board is 45cm and this distance is optimum for hanging up several tools and special kits.
Tool cabinets can be extended by attaching alongside or face to face according to needs. Facing sides of cabinets can be connected and formed as a bridge from upside with an 80cm distance.The facades of cabinets are not covered with metal sheet. Upon your request, external facades of cabinets can be covered with metal sheet and a locking system can be applied.

Order Code: ww-TSS-PTC-2000-5-KIT