The EvoTorque® is an electronic torque tool designed for applying torque to threaded fasteners. The unique ‘Intelligent Joint Sensing’ technology will accurately tighten to the correct torque without the risk of excess overshoot or undershoot that is common in other electric tools.
EvoTorque® utilises patent pending motor technology and shut off control software to give unprecedented joint control from hard through to soft joints. Water and dust sealed to IP44 the tool has third party sound verification (Lwa) of 72.3dB (A) and a vibration level of 0.304m/s² for smooth and quiet delivery.
Models are available from 1000 N•m to 6000 N•m in both 110V and 230V
Torque Measuring Feature
Accuracy: Each tool is factory calibrated to ±3% and supplied with a traceable calibration certificate
Clear-Go/ No-Go Joint Completion Feature: Clear indication of successful joint applicaiton. Operator can confidently interpret the tool , making it safer to use
Quietness & Low Vibration: Third party verified sound power (Lwa)of 72,3 dB (A) and vibration level ob 0,304m/S²
Patent Pending Motor Technology and Motor Control
Software gives unprecedented joint control
Dual Units of Torque Measurement: Torque can be set in Nm or lbf ft by by the operator
Temperature Independent Motor: The motor will continue to delivery correct torque regardless of temperature changes unlike permanent magnet motors
Agle Control: Evo Torque allows precise angle (±2°) to be applied. Every tool is calibrated for angle and the results are included on the certificate of calibration
Regenerating Braking Technology: Kinetic braking to avoid overshoot of hard joints
Made in England: Designed and manufactured in the UK.
|Square Drive||inch||3/4”||3/4”||1”||1 ½”|
|Reaction Arm Weight||Kg||0.7||0.7||0.7||2.1|