One of the concerns in putting a torque tester into an environment where people are not calibration specialists is that incorrect selections will be made with the potential of incorrect tool setting and consequently joint failure.
The 'TruCheck' torque wrench testers aim to cut the cost of purchasing a torque wrench calibration system, and remove the fears over the complexity of using such equipment.
| Model |
Test Range | Accuracy | Driver Type |
Display | Sizes | Shipping Weight |
| # | Nm | Inch | ** | mm | Kg | |
| 43222 | 10 - 350 | ±1% | 1/2" sq driver (female) | 4 digit LED | 145.5 x 150 x 85 | 3.2 |
| 43231 | 100 - 1000 | ±1% | 27 mm hexagon (male) | 4 digit LED | 145.5 x 175 x 85 | 4.8 |
| 43245 | 200 - 2000 | ±1% | 27 mm hexagon (male) | 4 digit LED | 145.5 x 175 x 85 | 5.5 |
MODE Button
1) Track Mode (‘trAC‘ is displayed). Display follows torque applied
2) Click Mode (‘CLIC‘ is displayed). Display shows first peak of torque applied. Serial data output of peak torque is automatically transmitted. Display automatically resets after 3 seconds. For use with ‘click’ type torque wrenches.
3) Dial Mode (‘dIAL‘ is displayed). Display shows peak of torque applied. Press RESET to clear the display.
For use with ‘dial’ and ‘electronic’ type torque wrenches.
UNIT Button
Press UNIT to change units of measurement.
RESET Button
Press RESET to reset display in Dial mode.
Serial data output of peak torque is also transmitted.
Press RESET to transmit serial data in Track mode.
LIMIT Button
1. Press LIMIT to enter target torque setting.
Display flashes between ‘SEt’ and the target torque setting.
2. Press LIMIT to enter ± percentage tolerance setting from 1 to 10%. Enter ‘0’ for no limits.
‘%’ and the ± percentage tolerance setting is displayed constantly.
3. Press LIMIT to finish. Display shows ‘FIN’ for 1 second.
All equipment is shipped with the factory calibration certificate.
Calibration services in Turkey are carried out by the SURKON.
Delivery Includes
* 43231 - Supplied with 3/4" square drive socket.
* 43245 - Supplied with 1" square drive socket.
TORQUE EQUIPMENT
Torque Screw Drivers
Norbar Torque Wrenches
Electronic Torque Wrenches
Hazet Hand Torque Wrenches
End Fittings & Impact Sockets
Replaceable Torque Wrench Set
Mechanical Torque Multipliers
Electric Torque Wrenches
Pneumatic Torque Wrenches
Hydraulic Torque Wrenches
Torque Wrench Pumps
Bolting Tools
Torque Tool Testers
Torque Calibration Equipment
Torque Transducers
Heavy Duty Torque Wrenches
Cordless Impact Wrench
Pneumatic Impact Wrenches
HIGH PRESSURE HYDRAULICS
FLANGE MANAGMENT TOOLS
HYDRAULIC HAND TOOLS
WORKSHOP EQUIPMENT
INDUSTRIAL PRODUCTS
© 2014 Surkon Makina Sanayi ve Ticaret Ltd. Şti.
Norbar TruCheck Brochure 
